Pharmaceutical & Healthcare Cleanroom Flooring in Qatar
Ultra-pure, seamless self-leveling epoxy and ESD resin systems meeting GMP, ISO 14644 cleanroom, and hospital infection-control standards across Qatar.
Technical Performance Metrics
Certified Cleanroom Flooring for Qatar Pharmaceutical Sector
Pharmaceutical manufacturing, vaccine compounding, and medical device assembly facilities in Qatar require ultra-pure, non-particulating floors. Our cleanroom epoxy systems eliminate all microbial harbor points and withstand daily disinfection protocols.
ISO 14644 & GMP Compliance
Monolithic glass-smooth surfaces meeting Class 1 to Class 100,000 (ISO Class 3 to ISO Class 8) airborne particulate cleanliness requirements.
- • Zero particulate shedding
- • Seamless radius wall coving
- • Flush door and drain details
Vaporized Hydrogen Peroxide (VHP) Proof
Impervious to aggressive decontamination cycles using Vaporized Hydrogen Peroxide (VHP), chlorine dioxide gas, and quaternary ammonium sanitizers.
- • No surface degradation from VHP
- • Stain proof against bio-fluids
- • High chemical cross-linking
Electro-Static Dissipative (ESD) Control
Prevents static electricity buildup during dry powder formulation, tablet pressing, and sensitive electronic diagnostic equipment operations.
- • ANSI/ESD S20.20 compliant
- • Prevents powder ignition
- • Protects microelectronics
Pharmaceutical Cleanroom Specifications
Complies with US FDA, cGMP, and European Pharmacopoeia cleanroom standards.
| Parameter | Standard Test | Engineering Value | Operational Relevance |
|---|---|---|---|
| Cleanroom Classification | ISO 14644-1 | Suitable for ISO Class 3 to Class 8 | Non-particulating resin matrix tested for airborne particle emission. |
| Chemical Resistance | Sterilization Cycles | Immersion resistant to VHP, IPA, Sporicides | No surface swelling, chalking, or loss of gloss. |
| Biological Cleanliness | ISO 846 (Fungal / Bacterial) | Class 0 (No growth / Inert) | Provides zero nutrients for bacterial or fungal colonization. |
| Compressive Strength | ASTM C579 | 75 N/mm² | Withstands heavy cleanroom carts, autoclave trolleys, and tablet presses. |
| Shore D Hardness | ASTM D2240 | 82 – 85 Shore D | Impervious to rolling wheel casters and mobile stainless steel tables. |
Maintaining Pure Environments in Qatar Arid Climate
Air conditioning and outdoor dust present challenges for Qatar cleanroom operations.
Low Indoor Humidity & Static Discharge
HEPA air systems dry indoor air below 30% RH, causing workers to generate static charges that ignite fine chemical powders.
Airborne Desert Dust Infiltration
Outdoor dust storms can infiltrate during maintenance doors, settling into uneven floors.
Aggressive Hospital Disinfection
Hospital cleanrooms use sporicides and phenolic disinfectants that strip standard commercial wax and vinyl tiles.
Dust-Free Cleanroom Installation Methodology
We maintain strict cleanliness procedures during all phases of cleanroom flooring installation.
HEPA Dust-Contained Diamond Grinding
Planetary diamond grinding with triple HEPA filtration to eliminate airborne particulate emissions.
Double-Coat Epoxy Pore Sealing
Applying two coats of penetrating epoxy primer to seal all concrete porosity and eliminate outgassing.
Self-Leveling Pure Epoxy Body Coat
Pouring high-purity self-leveling resin, spiked-rolling to create a flawless monolithic plane.
Integral Radius Coving Installation
Installing 50mm to 100mm seamless coved wall baseboards flush with cleanroom wall panels.
Particle Emission Handover Testing
Performing particulate and electrical resistance verification before handing over the cleanroom envelope.
Frequently Asked Technical Questions
Detailed engineering answers regarding application parameters, substrate preparation, durability standards, and maintenance in Qatar.
GMP regulations require cleanroom surfaces to be smooth, impervious, free of cracks and open joints, and easy to clean and disinfect. Our self-leveling epoxy creates an unbroken monolithic surface without grout lines, with integral radius coving that eliminates 90° dirt-trapping wall junctions.
Yes. Our cleanroom epoxy systems are tested against concentrated VHP exposure and show zero surface chalking, blistering, or discoloration after hundreds of decontamination cycles.
Yes. We install ANSI/ESD S20.20 compliant electrostatic dissipative self-leveling epoxy systems that safely bleed off static charges to ground, preventing powder agglomeration and ignition hazards.
Explore Related Systems & Locations in Qatar
Schedule an On-Site Substrate Evaluation in Qatar
Our mobile technical teams conduct comprehensive substrate diagnostics across all industrial zones and municipalities in Qatar—including captive shot blasting profile testing, in-situ relative humidity (ASTM F2170), and compressive pull-off testing.